Table of Contents
What is the Purpose of a Ceramic Coating for Cars?
On the surface of every car is primer, a base coat of paint, and a clear coat which protects the paint from external elements. A ceramic coating for cars is a product that is applied to the surface of your car on top of the clear coat.
Essentially, a ceramic car coating is a second layer of skin on the surface of your car. It utilizes nanotechnology, which are tiny particles that come together to form a very thin and transparent layer that is completely invisible to the naked eye.
This layer seals the pores on your car’s paint, producing superior hydrophobic properties, as well as more resistant to ultra-violet rays, scratches, chemicals, and extreme heat. The ceramic coat forms a semi-permanent bond with the surface of your vehicle meaning that it will not wash away or break down over a short period of time.
DIY Coatings vs Professional 9H Nano Coatings
When it comes to Ceramic Coating, you have a few options. You can have it applied professionally or you can do it yourself. Since ceramic car coating has become more mainstream, DIY consumer kits have become common and can be a viable option if you are on a tighter budget. Some are harder to install while others are simple spray and wipe off quick coat solutions.
The professional ceramic coating cost from Ceramic Pro starts at just $300 depending on the package that is best for you. These ceramic coatings are applied by trained and certified professionals. The process typically takes anywhere between 1-5 days depending on the original condition of your paint.
Recently, consumer level car coatings have been entering the marketplace making it more accessible to drivers who are more concerned about protection against the elements and ease of cleaning. These products are specially formulated, making them less sensitive than professional-grade car coatings and can be applied with little to no experience.
However, the quality and durability can vary based on the product. It is important to note that the DIY segment of ceramic coating is packed with inferior products with over-exaggerated claims.
In 2023– the main dispute between DIY ceramic coating manufacturers is the battle for who has the most silica or SiO2 in their formulation. The problem is – when you add a higher percentage of SiO2, you need a corresponding increase of carrier solvents for the coating to harden – which creates extended longevity and flatness of the coating.
Since DIY coatings remove most carriers solvents from their formulations – to make it easier for consumers to install, it’s a waste of raw ingredient. The moral of the story – if you’re looking for the best car coatings for DIY enthusiasts, don’t buy into the highest percentage of SiO2 available marketing hype. They do not last if professionally applied Ceramic Pro products.
- Nano ceramics are relatively user-friendly and easier to apply
- Ceramic coating a car offers extremely cost-effective paint protection
- The results are visible, but have a lot of variables that factor into the quality
- Properly preparing the surface of your paint can be difficult
- You may need to conduct extensive research because there are a lot of poor-quality knockoffs out there
- Companies may not provide you with proper guidance in terms of application
- Some companies can exaggerate benefits
Is a Ceramic Coating Good for Cars?
Yes, a ceramic coat is good for your car. With paint correction completed prior to application, it can improve the shine of the vehicle’s paint, block UV rays, and provide a protective coating that can last years.
The idea of a ceramic paint coating is to protect your car from as much wear and tear caused by daily use as best as you possibly can. A ceramic paint application not only exceeds protection of a paint sealant, but swirl marks can be removed with paint correction, and produce an amazing shine.
When it comes to paint protection, a ceramic coat can reduce brake dust from sticking, lasts longer than wax, and improves the car’s finish. A nano coating provides a protective layer over the car’s surface and delivers the ultimate UV protection.
The surface of your car paint is constantly being attacked by tint of sunlight, and the unpredictability of nature. Bird droppings, bug splatters, and tree sap can stick, requiring a clay bar treatment when you only use car wax for protection.
Are Ceramic Coatings Right for You?
Yes, absolutely. The upfront investment in the protection of your car will pay for itself in the long run. Of course, it won’t make your car bullet proof, but it will do a much better job at protecting your car than an ordinary wax or sealant. If you’re looking for protection against rock chips, a clear bra or paint protection film is your best option.
PPF or Ceramic Coating?
PPF or Paint Protection film is a high-quality polyurethane film that is applied to the clear coat of painted surfaces of new or used vehicles. It’s available in different appearances such as matte finish and an optically clear version. These films are highly resistant to the contaminants your vehicle will encounter on a day to day basis.
Paint Protection Film has a high resistance to impact and abrasion. PPF provides protection against rock chips, acid rain, bug splatter and more. These are things that ceramic coating does NOT do. Ceramic Pro recently launched a revolutionary product called Kavaca – which translates as Armor in Sanskrit.
The Final Verdict on Ceramic Coatings for Cars in 2023
So, when it comes down to which is the best ceramic coatings for cars in 2023 – Ceramic Pro 9H gives you the best bang for your buck. It’s sold in multiple package levels – each backed by a Carfax Verified warranty. It provides superior protection, and is applied by experts, while you sit back and relax. To learn more about the benefits of Ceramic Pro 9H and to request a free estimate, click the link below.